Tag Archives: Samtid

IKEA Samtid mood-light BT firmware — simple_serial

This firmware for the ISML + HC-05 Bluetooth module currently implements the same simple interface as the current WiFi-code named ‘browser_control’.

Pairing the ‘HC-05’on linux using the command line (openSUSE 13.2): When first powered on, the HC-05 module will … Continue reading

Posted in Arduino. | Tagged , , , , , , , | Comments Off on IKEA Samtid mood-light BT firmware — simple_serial

Small project #12 ⅔ — IKEA Samtid mood-light BT firmware

A user of the “new” version of the lamp has undertaken the heroic task of writing the Bluetooth code for controlling it! Here’s a sneak-peak:

Posted in Electronics. | Tagged , , , , , , , , , , | Comments Off on Small project #12 ⅔ — IKEA Samtid mood-light BT firmware

Small project #12 ½ — IKEA Samtid mood-light-upgrade upgrade

Someone, I won’t mention any names here, practically coerced me into upgrading this little project a bit. Now there’s the option to add a bluetooth module (HC-05, JY-MCU “ZS-040”), which supports remote code upload, or a WiFi module (ESP8266-1) using … Continue reading

Posted in Arduino. | Tagged , , , , , , , | Comments Off on Small project #12 ½ — IKEA Samtid mood-light-upgrade upgrade

Small project #12 — IKEA Samtid mood-light upgrade

This upgrade is based on the loved-by-everybody WS2812B intelligent RGB LED and works just fine with Adafruit’s NeoPixel library. The concept is – once again – rather simple. Whack a lot of WS2812B RGB LEDs onto a small board, add … Continue reading

Posted in Arduino. | Tagged , , , , , , , | 7 Comments

Small project #10 — IKEA Samtid reading-light upgrade

Yet another reincarnation of a PT4115 based LED lamp. This time I chose to add a micro-controller to the mix. No, not an ATtiny13 but an ATtiny45, as it contains a much desired feature for this job: high frequency PWM … Continue reading

Posted in Electronics. | Tagged , , , , , | Comments Off on Small project #10 — IKEA Samtid reading-light upgrade

IKEA SAMTID modification — part 2

Not having the right tools is such a pain. The modification I’m planning to do requires cutting 72 round 35mm holes into the white plastic foil that forms the Ikea SAMTID’s “head”. I tried to do that with a scalpel, … Continue reading

Posted in Arduino., DIY., Electronics. | Tagged , , , , , , | 11 Comments

IKEA SAMTID modification — part 1

I have 3 Ikea Samtid lamps. They’re affordable, useful and the design is timeless. One is in my living room and started to bore me. That has to change. As the lamp can be dismantled very easily it’s begging for … Continue reading

Posted in Arduino., DIY., Electronics. | Tagged , , , , , , | 3 Comments