Comments on: Who needs cheap MSOP10/TSSOP8 to DIP adapters ? http://blog.spitzenpfeil.org/wordpress/2009/10/16/who-needs-cheap-msop10-tssop8-to-dip-adapters/ "Another visitor! Stay a while. Staaaaay, FOREVER!" Thu, 09 Feb 2012 21:40:19 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: Orlando Castillo http://blog.spitzenpfeil.org/wordpress/2009/10/16/who-needs-cheap-msop10-tssop8-to-dip-adapters/#comment-947 Orlando Castillo Fri, 05 Aug 2011 02:07:22 +0000 http://blog.spitzenpfeil.org/wordpress/?p=2155#comment-947 Fantastic; so PHO is just another format extension but providing the same layer information. I'm sending out an order as we speak. Thank you! -O Fantastic; so PHO is just another format extension but providing the same layer information. I’m sending out an order as we speak. Thank you!
-O

]]> By: robert http://blog.spitzenpfeil.org/wordpress/2009/10/16/who-needs-cheap-msop10-tssop8-to-dip-adapters/#comment-944 robert Wed, 03 Aug 2011 22:31:20 +0000 http://blog.spitzenpfeil.org/wordpress/?p=2155#comment-944 The good news is, that you can just rename the extensions ;-) msop10_dip-Component.pho --> .GTL msop10_dip-Copper.pho --> .GBL msop10_dip.drl --> .TXT msop10_dip-Mask_Cmp.pho --> .GTS msop10_dip-Mask_Cop.pho --> .GBS msop10_dip-SilkS_Cmp.pho --> .GTO msop10_dip-SilkS_Cop.pho --> .GBO msop10_dip-Edges_Pcb.pho --> .OLN If they should complain about the .OLN, the board outline is present in the other layer files as well. But they should figure that out easily. The good news is, that you can just rename the extensions ;-)

msop10_dip-Component.pho –> .GTL
msop10_dip-Copper.pho –> .GBL
msop10_dip.drl –> .TXT
msop10_dip-Mask_Cmp.pho –> .GTS
msop10_dip-Mask_Cop.pho –> .GBS
msop10_dip-SilkS_Cmp.pho –> .GTO
msop10_dip-SilkS_Cop.pho –> .GBO
msop10_dip-Edges_Pcb.pho –> .OLN

If they should complain about the .OLN, the board outline is present in the other layer files as well. But they should figure that out easily.

]]> By: Orlando Castillo http://blog.spitzenpfeil.org/wordpress/2009/10/16/who-needs-cheap-msop10-tssop8-to-dip-adapters/#comment-941 Orlando Castillo Wed, 03 Aug 2011 07:48:48 +0000 http://blog.spitzenpfeil.org/wordpress/?p=2155#comment-941 Robert, I'm interested in using the gerbers you provided for the MSOP10 to DIP adapter. I'm sort of a newbie to electronics/PCB design so apologies if this is a bad question, but I really want to get this done so I can use the LT1618 for a project I'm trying. When I downloaded the files you provided, they had names like Edges, Copper, etc (in the gerber folder of the zip file), and had an extension ".pho". I'm submitting the Gerbers to Seeedstudio for the PCB design (http://www.seeedstudio.com/depot/fusion-pcb-service-p-835.html?cPath=185). However, their site says they require the layers with different names and extensions; see below. So my question is, Could you briefly clarify for me the relation between your files and the layers below so that I can have them made? Seeedstudio's required layers: Top layer: pcbname.GTL Bottom layer: pcbname.GBL Solder Stop Mask top: pcbname.GTS Solder Stop Mask Bottom: pcbname.GBS Silk Top: pcbname.GTO Silk Bottom: pcbname.GBO NC Drill: pcbname.TXT Thanks much, Orlando Robert,

I’m interested in using the gerbers you provided for the MSOP10 to DIP adapter.
I’m sort of a newbie to electronics/PCB design so apologies if this is a bad question, but I really want to get this done so I can use the LT1618 for a project I’m trying.

When I downloaded the files you provided, they had names like Edges, Copper, etc (in the gerber folder of the zip file), and had an extension “.pho”.

I’m submitting the Gerbers to Seeedstudio for the PCB design (http://www.seeedstudio.com/depot/fusion-pcb-service-p-835.html?cPath=185). However, their site says they require the layers with different names and extensions; see below.

So my question is, Could you briefly clarify for me the relation between your files and the layers below so that I can have them made?

Seeedstudio’s required layers:
Top layer: pcbname.GTL
Bottom layer: pcbname.GBL
Solder Stop Mask top: pcbname.GTS
Solder Stop Mask Bottom: pcbname.GBS
Silk Top: pcbname.GTO
Silk Bottom: pcbname.GBO
NC Drill: pcbname.TXT

Thanks much,
Orlando

]]> By: robert http://blog.spitzenpfeil.org/wordpress/2009/10/16/who-needs-cheap-msop10-tssop8-to-dip-adapters/#comment-596 robert Sat, 17 Jul 2010 15:00:03 +0000 http://blog.spitzenpfeil.org/wordpress/?p=2155#comment-596 Currently I don't have any more adapters to spare. You can get similar ones at <a href="http://www.nkcelectronics.com/msop10-to-dip-adapter-101010.html" target="_blank" rel="nofollow">nkcelectronics</a>. Currently I don’t have any more adapters to spare.

You can get similar ones at nkcelectronics.

]]> By: robert http://blog.spitzenpfeil.org/wordpress/2009/10/16/who-needs-cheap-msop10-tssop8-to-dip-adapters/#comment-367 robert Fri, 23 Oct 2009 09:50:32 +0000 http://blog.spitzenpfeil.org/wordpress/?p=2155#comment-367 http://www.linear.com/pc/productDetail.jsp?navId=H0,C1,C1003,C1042,C1031,C1061,P2079 http://www.linear.com/pc/productDetail.jsp?navId=H0,C1,C1003,C1042,C1031,C1061,P2079

]]> By: Helmut http://blog.spitzenpfeil.org/wordpress/2009/10/16/who-needs-cheap-msop10-tssop8-to-dip-adapters/#comment-366 Helmut Fri, 23 Oct 2009 08:08:58 +0000 http://blog.spitzenpfeil.org/wordpress/?p=2155#comment-366 Wird die Spannung bei offenem Ausgang begrenzt? Wird die Spannung bei offenem Ausgang begrenzt?

]]> By: Milarepa http://blog.spitzenpfeil.org/wordpress/2009/10/16/who-needs-cheap-msop10-tssop8-to-dip-adapters/#comment-365 Milarepa Fri, 16 Oct 2009 16:37:33 +0000 http://blog.spitzenpfeil.org/wordpress/?p=2155#comment-365 Yes, please! I'd take a few of those. Yes, please! I’d take a few of those.

]]> By: FlorinC http://blog.spitzenpfeil.org/wordpress/2009/10/16/who-needs-cheap-msop10-tssop8-to-dip-adapters/#comment-364 FlorinC Fri, 16 Oct 2009 15:51:11 +0000 http://blog.spitzenpfeil.org/wordpress/?p=2155#comment-364 I would be interested in the assembled board, with LT1618 soldered. Keep up the good work! I would be interested in the assembled board, with LT1618 soldered.
Keep up the good work!

]]>